自特意写一首散文来介绍因VPC搭建筑局域网的一体步骤,Microsoft Virtual PC Tip – Using the

在VPC中应用回环网的缘故与操作步骤!
当VPC中接纳回环网的原委以及操作步骤!Microsoft Virtual PC Tip – Using the
Microsoft Loopback Adapter

眼前几乎上在爱人测试一个基于WS-AT的分布式应用,不过接连公司网络的VPN出现了问题,不得不拔取VPC在本机搭建筑一个局域网。尽管在此此前也召开了如此的品,可能是蛮老没整了了,一些细节记不清了,所以也磨了好巡。在此间,我特意写一首作品来介绍因VPC搭建筑局域网的方方面面手续,没有什么技术含量,只当被有同样需要之情侣多一个参照。

Microsoft Virtual PC Tip – Using the Microsoft Loopback Adapter
Microsoft Windows 2000 and XP (and probably others) ship with a built-in
network interface driver called the “Microsoft Loopback Adapter” that
lets you create a local-only network interface device. This adapter can
be extremely useful when you are doing development testing using Virtual
PC and want to isolate your Virtual PC’s from your main network.
For instance, let’s say that you want to test a SharePoint Portal
configuration with a separate front end web server, a separate index and
job server, and a separate database server. Using Virtual PC you would
configure the network adapter of your virtual machine to use the
Microsoft Loopback Adapter for each virtual machine in your virtual
server farm. When you spin up all of your virtual machine instances,
they would only be able to communicate among themselves and any traffic
would be isolated and limited to your testing environment.
To configure your Microsoft Loopback Adapter under Windows XP, do the
following:
From the Control Panel, select “Add Hardware”
Select “Yes, I have already connected the hardware”
Select “Add a new hardware device” (at the bottom of the listbox)
Select “Install the hardware that I manually select from a list
(Advanced)”
Select “Network adapters”
Select “Microsoft” as the manufacturer and “Microsoft Loopback Adapter”
as the adapter
From within Virtual PC
Select your virtual machine
Go to the Settings (either right-click the VM and select “Settings” or
from within a running instance go to the “Edit” menu and select
“Settings)
Click the “Networking” setting
For your network adapter, select “Microsoft Loopback Adapter”
Now, you should be able to see your other running Virtual PC instances
that also share the same loopback adapter!
Note: If you run into a problem where you can’t select the Microsoft
Loopback Adapter”, you’ll need to verify that 1) the “Virtual Machine
Networking Services” are installed for the loopback adapter, and 2) if
they are, and you still can’t select the adapter, uninstall the service
and then reinstall the service (by pointing to the Virtual PC
installation directory under Utility/VMNetSrv).
Happy Virtual PC’ing!
Technorati Tags: virtualpc

自明日之Host Machine为Windows 7 Ultimate (X64) ,Virtual
Machine为Windows Server 2008
(X86),都是现的。本篇作品未相会波及什么安全VPC的题目,仅仅涉及到什么用Host
PC和VPC成为与一个局域网中简单宝可并行链接的主机,下边是针对性3单关键步骤的:

以以下步骤添加供 Virtual PC 使用的 Microsoft Loopback Adapter:
控制面板:添加新硬件,
大凡,我早就链接了之硬件,下同样步
“添加新的硬件装置”,下同样步
安装我手动从列表选取的硬件,下一致步
“网络适配器”,下一样步
Microsoft: Microsoft Loopback Adapter,下一步

步骤同:安装Microsoft Loopback 艾达(Ada)pter网络适配器

开拓Device Manager,右键接纳主机名称,在探出底上下文菜单中采取”Add
legacy hardware”。

图片 1

起如下一个Welcome to the Add Hardware Wizard 对象约,点击”Next”按钮。

图片 2

跻身如下一个会话框,选取第二只选项”Install the hardware that I manually
select from a list (Advanced) “,然后点击”Next”按钮。

图片 3

弹有如下一个硬件类型选取对话框,硬件类型列表中采纳”Network
adapter”,然后点击”Next”按钮。

图片 4

硬件设置向导进入如下一个”Select Network
Adapter”,在硬件厂商列表中接纳”Microsoft”,在网络适配器列表中接纳”Microsoft
Loopback 艾达pter”,然后点击”Next”按钮。

图片 5

每当弹出的”The wizard is ready to install your
hardware”对话框中,然后点击”Next”按钮,开端安装硬件。

图片 6

初稿先发:http://anforen.5d6d.com/redirect.php?tid=64&goto=lastpost#lastpost

手续二、将VPC的网络适配器设置也Microsoft Loopback Adapter

开拓Virtual PC Console,选取相应的VPC,点击Setting按钮对其开展安装。

图片 7

每当VPC设置面板中装置项目遭到摘”Networking”,采用我们才安装的”Microsoft
Loopback Adapter”作为网络适配器,点击OK确认。

图片 8

步骤三、设置Host Machine和Virtual Machine的IP

在Host Machine中,打开Network and Sharing Center,点击Channe Adapter
Setting链接,进入Network Connections窗口。

图片 9

右击采用因Microsoft Loopback 艾达(Ada)pter的连年(这里是Local Area
Connection 2),在上下文菜单中选取Proeprties,进入连接的性窗口。

图片 10

选Internet Protocol Version 4(TCP/IPv4),点击
Properties按钮,举办对应的IP设置,在此间IP地址与子网掩码分别吗192.168.0.6和255.255.255.0.

图片 11

接下来对Virtual
Machine相应的链接以地点的步骤设置IP地址,需要装成相同之网段,我用的IP地址和子网掩码分别吗192.168.0.8以及255.255.255.0.

图片 12

至这截止,Host Machine和Virtual
Machine就变成了同一个局域网面临之星星点点个主机。你得直接利用VPC界面操作Virtual
Machine,不过自己个人习惯以Remote
Desktop。另外,你可依据实际安全需要,对防火墙举办对应设置。

图片 13

作者:Artech
出处:http://artech.cnblogs.com
本文版权归作者和网易共有,欢迎转载,但未经作者同意要保留这一个段子讲明,且在篇章页面显著地点为有原文连接,否则保留追究法律责任的权利。

相关文章